PVDF Li-battery Grade DF-5--Pureflon PVDF--Hangzhou Fine Fluorotech Co., Ltd

Products

PVDF Li-battery Grade DF-5

Pureflon PVDF

Characteristic:

Physical properties	Unit	Specification	ASTM Test standard
Appearance	--	White powder	--
Density	g/cm3	1.74～1.77	ASTM D792, @23/230C
Solubility	--	Solution clear and transparent, no impurities	300C，1hour 1g/10ml NMP
Rotation Viscosity	mpa.s	≥200	1g/10ml NMP, 300C
Intrinsic Viscosity	dl/g	1.0-2.0	DMA, 300C
Water absorption	%	≤0.10	Karl Fisher
Mechanical properties
Tensile yield strength	Mpa	--	ASTM D638 50mm/min@230C
Yield elongation	%	--
Tensile strength	Mpa	--
Elongation at break	%	--
Hardness	Shore D	--
Thermal properties
Melting point	℃	156-175	ASTM D3418,100C/min
Crystallizing heat	℃	140	--
Brittleness temperature	℃	--	ASTM D746A
Molding shrinkage	%	2-3
Electrical properties
Surface resistivity	Ohm/square	≥1.1014	ASTM D257/Din 53483
Volume resistivity	Ohm.cm	≥1.1014	ASTM D257/Din 53483

CAS No.：24937-79-9

Process safety instructions

PVDF has good burning suppression performance and smoke suppression performance, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;
Operators should take good care of personal protection during production.

Packaging and storage

25 kg and 250 kg packages can be provided. PVDF is packed in double layer of polyethylene plastic bag and then put into a hard cardboard drum.
It must be stored in clean, cool, dry place.

Related products :

PVDF Injection Grade DF-1